Instructions for Red Hat and Debian based systems.

I. Installation
---------------

1) Install the 'sie-dns-sensor' package.

   `rpm -i sie-dns-sensor-0.6.6-1.x86_64.rpm` (Red Hat) OR
   `dpkg -i sie-dns-sensor_0.6.6-1_amd64.deb` (Debian).

2) Customize the configuration.

   Edit /etc/default/sie-dns-sensor and set the 'login' variable.
   the following variables may need to be set to something else
   depending on the environment:

        bpfpat_src (default: 'src host 192.0.2.1')
        bpfpat_dst (default: 'dst host 192.0.2.1')
        interface  (default: 'eth0')
        channel    (default: 'ch202')

3) Create or install an upload key.

   Run `sie-gen-key` OR copy a pre-generated private key to
   /var/spool/sie/keys/upload and chmod permissions to 0600.
   `chmod 0600 /var/spool/sie/keys/upload`.

4) Start the service.

   `service sie-dns-sensor start` (Red Hat) OR
   `/etc/init.d/sie-dns-sensor start` (Debian) OR
   reboot.

5) Verify that uploads are occurring.

   `tail -f /var/log/messages | grep sie` should show 'successfully
   uploaded ...' messages approximately once a minute.

II. Removal
-----------

1) Remove the 'sie-dns-sensor' package.

   `rpm -e sie-dns-sensor` (Red Hat) OR
   `dpkg -P sie-dns-sensor` (Debian).

2) Remove the saved config file, if any.

   `rm -f /etc/default/sie-dns-sensor.rpmsave` (Red Hat).